IMX071 (D5100/D7000) Sensor Protocol

All things embedded.
*NO FEATURE REQUESTS*

Re: IMX071 (D5100/D7000) Sensor Protocol

Postby coderat » Wed Aug 22, 2018 1:31 pm

Hi,
I am back. The registers that I describe in our WIKI for IMX071 are almost 100% sure and come from non-Nikon camera.
Just PM me.
coderat
Core Developer
 
Posts: 2278
Joined: Fri Apr 26, 2013 10:21 am
Been thanked: 450 times

Re: IMX071 (D5100/D7000) Sensor Protocol

Postby astronomer » Sun Aug 26, 2018 8:01 am

Hi coderat,

I didn't notice the information on wiki. I'm thinking the same register set 0x08-0x0B is the window crop.
Simeon has a ptp tool to modify in memory register setting. We can try this. But I guess there are additional register on ISP need to alter corresponding in order to receive the image right?
User avatar
astronomer
Developer
 
Posts: 722
Joined: Fri Apr 06, 2012 10:06 am
Location: US
Been thanked: 292 times

Re: IMX071 (D5100/D7000) Sensor Protocol

Postby coderat » Thu Aug 30, 2018 9:36 am

Usually you set crop registers, then use different "mode" to start sampling. Of course EI15x-bridge need a different configuration, but I thought you know those registers better than me?
At least you can check how many lines you get transmitted from IMX071 (osci) - that would be proof of concept if image size is reduced (duration).

I must check again that project, because I didn't touch it for a long time and do not remember further details.
coderat
Core Developer
 
Posts: 2278
Joined: Fri Apr 26, 2013 10:21 am
Been thanked: 450 times

Previous

Return to Firmware

Who is online

Users browsing this forum: No registered users and 11 guests