Dark Current Enable Tool
Re: Dark Current Enable Tool
by abhoriel » Sun Feb 14, 2016 10:32 pm
many thanks for the reply. I will enable the dark current menu option and NEF lossless compression!
- abhoriel
- Posts: 2
- Joined: Sun Feb 14, 2016 12:24 pm
- Been thanked: 0 time
Re: Dark Current-D4/DF Update - Test needed
by Preyr » Mon Apr 04, 2016 1:32 am
- Preyr
- Posts: 4
- Joined: Mon Apr 04, 2016 1:28 am
- Been thanked: 0 time
Re: Dark Current-D4/DF Update - Test needed
by astronomer » Mon Apr 04, 2016 7:24 am
-
astronomer - Developer
- Posts: 722
- Joined: Fri Apr 06, 2012 10:06 am
- Location: US
- Been thanked: 293 times
Re: Dark Current Enable Tool
by Preyr » Mon Apr 04, 2016 9:29 am
Is there an article which describes your workflow in few words? Like, where do you get information about custom chips.
- Preyr
- Posts: 4
- Joined: Mon Apr 04, 2016 1:28 am
- Been thanked: 0 time
Re: Dark Current Enable Tool
by astronomer » Mon Apr 04, 2016 12:15 pm
-
astronomer - Developer
- Posts: 722
- Joined: Fri Apr 06, 2012 10:06 am
- Location: US
- Been thanked: 293 times
Re: Dark Current Enable Tool
by Preyr » Tue Apr 05, 2016 4:44 am
Two more questions if you do not mind (slightly off topic though).
My understanding is: ASIC is black box which scans the sensor and mangles data according to registers (processing settings, in a way they are).
1) Are sets of settings stored anywhere in firmware data?
2) Is it theoretically possible for a person with much of free time to find out whether different sets of settings for different processing modes are stored in firmware image and possibly those left there for debugging purposes including those which disable leveling, scaling, cropping?
My understanding is: ASIC is black box which scans the sensor and mangles data according to registers (processing settings, in a way they are).
1) Are sets of settings stored anywhere in firmware data?
2) Is it theoretically possible for a person with much of free time to find out whether different sets of settings for different processing modes are stored in firmware image and possibly those left there for debugging purposes including those which disable leveling, scaling, cropping?
- Preyr
- Posts: 4
- Joined: Mon Apr 04, 2016 1:28 am
- Been thanked: 0 time
Re: Dark Current Enable Tool
by astronomer » Tue Apr 05, 2016 6:50 pm
-
astronomer - Developer
- Posts: 722
- Joined: Fri Apr 06, 2012 10:06 am
- Location: US
- Been thanked: 293 times
Re: Dark Current Enable Tool
by Preyr » Wed Apr 06, 2016 6:13 am
Thank you for your answers.
Is the dump of version 1.00 of D7100 firmware available? Is ITRON OS or other OS of some kind related to D7100?
Is the dump of version 1.00 of D7100 firmware available? Is ITRON OS or other OS of some kind related to D7100?
- Preyr
- Posts: 4
- Joined: Mon Apr 04, 2016 1:28 am
- Been thanked: 0 time
Re: Dark Current Enable Tool
by astronomer » Thu Apr 07, 2016 10:30 am
-
astronomer - Developer
- Posts: 722
- Joined: Fri Apr 06, 2012 10:06 am
- Location: US
- Been thanked: 293 times
Re: Dark Current Enable Tool
by alescx » Fri Apr 08, 2016 11:38 pm
Hi astronomer,
I tried to decode the firmware of the D610, but I don't get any result. Just blank windows.. Any suggestions?
I tried to decode the firmware of the D610, but I don't get any result. Just blank windows.. Any suggestions?
- alescx
- Posts: 6
- Joined: Sun Jan 10, 2016 10:17 am
- Been thanked: 0 time
Who is online
Users browsing this forum: No registered users and 3 guests