Dark Current Enable Tool

All things embedded.
*NO FEATURE REQUESTS*

Re: Dark Current Enable Tool

Postby Silentg » Mon Aug 03, 2015 2:04 pm

First of all, I'd like to thank astronomer for all his hard work. A lot of people owe you a beer.

With that said, I've applied the Dark Current Enable Tool along with a bunch of other mods to my D800 and am a little confused as to how I'm supposed to process the images. From what you said, DSS is a poor choice to edit them because it doesn't understand that the black level has been messed with. What should I use instead? Also, it would be amazing if you could investigate performing this hack on the Nikon Coolpix A (it's a point and shoot with the D7000's sensor and no AA filter. 28mm equivalent and the same Expeed processor).

Thanks again.
Silentg
 
Posts: 8
Joined: Mon Aug 03, 2015 1:59 pm
Been thanked: 1 time

Re: Dark Current Enable Tool

Postby astronomer » Tue Aug 04, 2015 7:44 am

Hi,

It's my pleasure.

Regarding the calibration, I used the MaxIM DL and turned "Auto-Optimize" on since DSLR is mostly temperature unregulated. It's giving very good result based on some testing.
For me, I wrote a calibration pipeline in Rstudio to carefully cancel out dark current based on optical black pixels. And it's giving me extreme linearity for flat fielding. A typical 50mm lens wide field corrected with bias/dark/flat shows no vignetting in corner at all. That image is taken in the death valley so no light pollution and background gradient. Only level, curve and highlight is used in post processing.

I haven't compared mine with that from MaxIM. But I think MaxIM is sufficient if not the best at this moment. Due to hard to figure out the optical black pixels on other cameras, I have yet to publish that code.

Hope that helps,
astronomer
User avatar
astronomer
Developer
 
Posts: 722
Joined: Fri Apr 06, 2012 10:06 am
Location: US
Been thanked: 293 times

Re: Dark Current Enable Tool

Postby astronomer » Wed Aug 05, 2015 12:35 pm

User avatar
astronomer
Developer
 
Posts: 722
Joined: Fri Apr 06, 2012 10:06 am
Location: US
Been thanked: 293 times

Re: Dark Current Enable Tool

Postby jpd321 » Thu Dec 17, 2015 4:06 pm

Astronomer - thanks much for the development of this tool - I'm using it with a D600 and looking forward to using it in the field. So far experimenting with measuring dark current etc.
One request though - I'm having some stability issues using it with an intervalometer - it seems to kick out of 'dark current' mode sometimes, even when remaining connected to a PC through USB, (and almost always when USB disconnected). Best long term answer would be a menu enable mode as you have done for D800 and others - any plans for this?
One fallback would be calling your command line tool via script before every shot - is there a 'quiet' flag that doesn't call the web page when calling the command line tool?

Thanks - Jeff
jpd321
 
Posts: 1
Joined: Wed Dec 16, 2015 8:50 am
Been thanked: 0 time

Re: Dark Current Enable Tool

Postby astronomer » Fri Dec 18, 2015 7:54 am

Hi Jeff,

I just got a D610. The menu entry will be considered.

But recently I'm occupied with my own CMOS camera project so it won't be available soon.

Best,
astronomer
User avatar
astronomer
Developer
 
Posts: 722
Joined: Fri Apr 06, 2012 10:06 am
Location: US
Been thanked: 293 times

Re: Dark Current Enable Tool

Postby Herra Kuulapaa » Mon Dec 21, 2015 11:49 pm

Or even a permanent true dark current mode - It would be great for stand alone setups.
For the record I've got some nice results with D600 lately so it's a very capable camera :)
Herra Kuulapaa
 
Posts: 34
Joined: Sun Dec 14, 2014 11:34 am
Been thanked: 27 times

Re: Dark Current Enable Tool

Postby drfalken » Sun Jan 17, 2016 5:37 pm

Hello,
I just tested the "True dark current - Menu based" hack on a D7000, and it works, but it causes a couple of minor problems.
Problem 1:
The frame with the true dark problem is missing a few columns and a few rows:

Here is a 60s exposure, with the true dark current option turned ON:
https://www.dropbox.com/s/3w9cpgheiu5vg ... N.NEF?dl=0

Here is a 60s exposure with the true dark current option turned OFF:
https://www.dropbox.com/s/enet1upschbwl ... F.NEF?dl=0

The other problem is that with the option turned on, the USB transfer of data to a PC no longer works. I use Backyard Nikon v.1.0 to drive the D7000, and with the option dark current option (menu based) ON, I can no longer download the frames directly from the camera to the hard drive: the camera will just hang there.

Just wondering if anybody else has encountered these issues...
Personally, I could use (and would gladly pay for) a hack that permanently enables the true dark current, even after turning the camera OFF.
Thanks!
drfalken
 
Posts: 1
Joined: Thu Jan 15, 2015 9:30 pm
Been thanked: 0 time

Re: Dark Current Enable Tool

Postby astronomer » Sun Jan 24, 2016 4:13 pm

User avatar
astronomer
Developer
 
Posts: 722
Joined: Fri Apr 06, 2012 10:06 am
Location: US
Been thanked: 293 times

Re: Dark Current Enable Tool

Postby abhoriel » Sun Feb 14, 2016 12:32 pm

Given that 'Dark Current Enabled' disables all RAW processing, is there any point patching 'star eater disable' as well?
Or for astrophotography do you need both ideally?

It'd be a little inconvenient if you need both as it would make it more difficult to use the camera for normal photography and astrophotography without refreshing the camera in-between.

Also does dark current enabled disable NEF lossy compression?

thanks!
abhoriel
 
Posts: 2
Joined: Sun Feb 14, 2016 12:24 pm
Been thanked: 0 time

Re: Dark Current Enable Tool

Postby astronomer » Sun Feb 14, 2016 8:57 pm

User avatar
astronomer
Developer
 
Posts: 722
Joined: Fri Apr 06, 2012 10:06 am
Location: US
Been thanked: 293 times

PreviousNext

Return to Firmware

Who is online

Users browsing this forum: No registered users and 22 guests