Page 23 of 23

Re: IMX071 (D5100/D7000) Sensor Protocol

PostPosted: Wed Aug 22, 2018 1:31 pm
by coderat
Hi,
I am back. The registers that I describe in our WIKI for IMX071 are almost 100% sure and come from non-Nikon camera.
Just PM me.

Re: IMX071 (D5100/D7000) Sensor Protocol

PostPosted: Sun Aug 26, 2018 8:01 am
by astronomer
Hi coderat,

I didn't notice the information on wiki. I'm thinking the same register set 0x08-0x0B is the window crop.
Simeon has a ptp tool to modify in memory register setting. We can try this. But I guess there are additional register on ISP need to alter corresponding in order to receive the image right?

Re: IMX071 (D5100/D7000) Sensor Protocol

PostPosted: Thu Aug 30, 2018 9:36 am
by coderat
Usually you set crop registers, then use different "mode" to start sampling. Of course EI15x-bridge need a different configuration, but I thought you know those registers better than me?
At least you can check how many lines you get transmitted from IMX071 (osci) - that would be proof of concept if image size is reduced (duration).

I must check again that project, because I didn't touch it for a long time and do not remember further details.